23 Years of Filtration Excellence


An ISO9001:20015 Certified Company


Natural Gas Filters
Compressed Air Filters
Fuel Water Separators
CNG / PNG Filters
Sintered Filters
Filter Foam
Quality Control
Job Openings
About Us
Contact Us

Demister Pad Demister Pad

Demister Pad With Grid                               Demister Pad in Multiple Sections

Introduction: Delta Filters is involved in Design, Manufacture & Supply of a wide range of Demister Pads. Demister pads are also referred as mesh mist eliminators, mist pads, and wire mesh demisters. DELTA Demister Pads are used in gas liquid separation e.g. moisture separators for compressed air and column packing pads. Demister pads are also used in separation of water droplets from Steam. These pads have a wide range of applications in chemical industry, petroleum industry, pharamceutical industry and for separation equipment manufacturing.

Demister pads are effective in separating liquid phase from vapour phase. Typically demisters are mesh type coalescers, but can be constructed of vane pack as well. The function of Demister Pad is to coalesce fine droplets so that the combined drop is heavy and pulled down due to gravity. Usage of Demisters can help in reduction of size of Separator Vessels. The gas/vapour exiting the Separator Vessel is devoid of liquid droplets.

Working Principle : Demisters are employed for separation of Liquid Phase from Gaseous Phase. Gas or Vapour carries liquids in small droplet form. When the Gas / Vapour passes through the demister pad, the fine liquid droplets collide with the filaments of demister pad. Small droplets adhere to the filament. A sequence of droplets keep joining onto the filament and eventually combine to form bigger drops which are heavy enough to be pulled down due to gravity. The gas being lighter is usually routed to exit from top of the Separator Vessel and the Liquid from the bottom. Thus, Demister Pads are very effective in Gas Liquid Separation.

Material of Construction : SS 304, 304L, 316, 316L, 321, 430, Nickel, Monel, Inconel, Hastalloy, Alloy 20,Copper, Polypropylene, Nylon, Teflon

Structure : Single Piece or Multiple Pieces for installation through Man Hole. With Support Grid or Without Support Grid, depending on customer requirement.

Email: for more details


Distributor Wanted

Distributors wanted throughout India, Middle East, Africa, Asia & South America. CLICK to apply   

Corporate Office:

B-101 Sanpada Station Complex, Sanpada

Navi Mumbai, 400 705, INDIA

Tel: 91-22-2775 2357 / 91-22-2775 5105


Last modified: November 26, 2017