25 Years of Filtration Excellence


   An ISO9001:2015 Certified Company


Natural Gas Filters
Compressed Air Filters
Fuel Water Separators
CNG / PNG Filters
Sintered Filters
Filter Foam
Quality Control
Job Openings
About Us
Contact Us

       DELTA Industrial Products

  • Compressed Air Receivers: 20 Litre to 2000 Litre Capacity

  • Compressed Air Filters : Particulate & Oil Removal

  • Moisture Separators

  • Automatic Drains

  • Strainers : Tee, Basket, Y Type

  • Fuel Water Separators

  • Liquid Cartridge Filters

Air Receivers  |  Strainers  |  Compressed Air/Gas Filters  |  Moisture Separators  |  Automatic Drains  |  Filter Elements  |  Liquid Filters  | 

DELTA Air Receivers

  • Decrease wear and tear on the air compressor components, capacity control system and motor
  • Reduce excessive air compressor cycling
  • Eliminate pulsations on the air discharge line
  • Due to air expansion and cooling within the Vessel, the Receiver will separate a portion of moisture, oil and solid particles that might be present in the air.
  • Air Receiver offers additional storage capacity to be utilized in case of additional demand and/or electrical outage
  • Wide range of models, to handle storage capacities from 20 Litres upto 3000 Litres
  • Competitive Pricing. Minimal operating/maintenance costs.
  • Email:

Air Receiver

DELTA Compressed Air Receivers: 1000 Litre Capacity

Air receivers are pressure vessels used for compressed air storage. This equipment is recommended to be used in all compressed air systems. DELTA Air Receivers are designed as per ASME Sec VIII Div 1 Code. Our Air receivers always meet or exceed this code.

DELTA Air Receivers are equipped with a safety valve, which is set at a pressure lower than the design pressure but at a higher pressure than the operating pressure. The safety valve protects against excessive pressure buildup within the Air Receiver. DELTA Air Receivers are also equipped with a drain valve to eliminate accumulated moisture. Further the Receiver is fitted with a Pressure Gauge and Handhole. In case of Vertical Models: Leg Support is provided for easier installation.

DELTA Air Receivers are installed after Moisture Separators and before Air Filters in case of Wet Air. Due to air expansion and subsequent cooling, the presence of an Air Receiver separates moisture from compressed air. The discharge of Air Receiver reduces the load on Sub-Micron Filters and Dryers connected downstream. In case of Dry Compressed Air (i.e. Post Air Dryer) a Dry Receiver is employed to provide for sudden air demand from the Plant. Contact us today for more details and a Quote

DELTA Strainers

  • Line size from 1" nB through 40 " OD, Flange ratings : upto 1500 lb class
  • Housing : Carbon Steel, SA 516 Gr. 70, SS304, 316, 316L
  • Basket:    SS304, 316, 316L, Monel 400
  • Fluids: Water, Sea Water, Chemicals, Lubricating Oil, LSHS, Natural Gas
  • Viscosity: 0.1 cp through 1000 cp
  • Operating Temperature: upto 200oC

DELTA Y strainers are low cost equipments for mechanical removal of contaminants and solids from liquid, gas or steam lines. This is carried out by means of a perforated plate or wire mesh straining element. Y Strainers are convenient to install in Pipelines to protect pumps, meters, control valves and other expensive equipment.

     Y Type Strainers

DELTA Tee strainers are custom fabricated based on process parameters. They are designed to remove foreign particles from the pipeline.Tee Type Strainers are a lower in cost compared to Basket Strainers. DELTA Tee Strainers can be mounted either in Horizontal or Vertical orientation. Tee Type strainers are compact in size and are used for effective protection of pumps, valves and equipment.

Tee Type Strainers Tee Type Strainers Tee Type Strainers

Download Catalog Top

DELTA Compressed Air/Gas Filters DELTA has developed a wide range of Compressed Air Filters: 1) Flanged Models in Carbon Steel Housing 2) Inline Models in Cast Aluminum Housing 3) Inline Models in SS304 Housing 4) Flanged Models in SS304 Housing. Options include Differential Pressure Gauge, Automatic Drains. DELTA Compressed Air Filters are both Sub-Micronic and Coalescing in nature. They serve Oil Removal & Particle Removal, and guarantee technically oil and particle free air. Residual oil content: Less than 0.01 mg/M3. Particle removal: Available in 5, 1 , 0.1 and 0.01 micron ratings.


          Email: for more details Top

DELTA Compressed Air / Gas Filter Cartridges: Borosilicate glass fibre cartridges to replace Ultrafilter / Domnick Hunter / Zander / any other manufacturer's cartridges in your existing housing. Stainless Steel core and open cell polyurethane foam sock. Long life design.




DELTA Make Replacement Compressed Air Filter Elements for Ultrafilter Models:

We manufacture and supply a range of Filter Elements to replace Ultrafilter Models as per table below. These filter elements can be retrofitted in your existing OEM filter housing.

MF-05/20 DF-05/20-MF
SMF-05/20 DF-05/20-SMF
AK-05/20 DF-05/20-AK
MF-05/25 DF-05/25-MF
SMF-05/25 DF-05/25-SMF
AK-05/25 DF-05/25-AK
MF-07/25 DF-07/25-MF
SMF-07/25 DF-07/25-SMF
AK-07/25 DF-07/25-AK
MF-07/30 DF-07/30-MF
SMF-07/30 DF-07/30-SMF
AK-07/30 DF-07/30-AK
MF-10/30 DF-10/30-MF
SMF-10/30 DF-10/30-SMF
AK-10/30 DF-10/30-AK
MF-15/30 DF-15/30-MF
SMF-15/30 DF-15/30-SMF
AK-15/30 DF-15/30-AK
MF-20/30 DF-20/30-MF
SMF-20/30 DF-20/30-SMF
AK-20/30 DF-20/30-AK
MF-30/30 DF-30/30-MF
SMF-30/30 DF-30/30-SMF
AK-30/30 DF-30/30-AK


DELTA Moisture Separators Most economical solution to solve moisture problems in compressed air. DELTA's unique coalescing element in conjunction with anti re-entrainment barrier system knocks out 99.95% of all moisture. Can be used as a Pre-Filter for Sub Micron Filters.

The removal of water is imperative to the successful operation of compressed/gas/steam systems. Water causes corrosion of pneumatic tools, instruments and machinery resulting in malfunctioning. The cost of replacement and/or repairs of equipment, coupled with the corresponding down-time can be eliminated. DELTA's unique coalescing element in conjunction with anti re-entrainment barrier system knocks out 99.95% of moisture from compressed air/gas streams. When moisture laden air enters DELTA Moisture Separator, it comes in contact with the dense coalescing element. The element forces the water droplets to coalesce. This causes the droplets to grow in size and become heavy. Gravity does the rest by pulling it down to the sump. DELTA's innovative Vortex Containment Barrier System ensures peak efficiency. The dense coalescing element Best used as an effective pre-filter for sub-micron filters.

DELTA Moisture Separator with Automatic Drain
DS-1 1/2" BSP THREADED 130
DS-2 3/4" BSP THREADED 175
DS-4 1-1/2" BSP THREADED 500
DS-6 2 1/2" ASA 150 FLANGED 1000
DS-7 3" ASA 150 FLANGED 1500
DS-8 3" ASA 150 FLANGED 2000
DS-9 4" ASA 150 FLANGED 2500
DS-10 4" ASA 150 FLANGED 3000

Larger sizes on request.

  • Housing: Carbon Steel (Std.) , SS304 / SS316 (Option)
  • Coalescer: SS304 (Std.) , SS316 (Option)
  • Working Pressure: 10 Bar (Std.) , Upto 400 Bar (Option)
  • Drain: Manual (Std.) , Automatic Drain (Option)
  • Email:

Float Type Automatic Drains for Compressed Air service

Over 250 Units in Ready Stock Top

DELTA Liquid Filter/ Filter Elements: in Stainless Steel housing with PP wound / spun / pleated elements.
                TYPE                        SIZE                   RATING
           PP WOUND   2.5" DIA x 10", 20", 30" & 40"  0.1, 1, 5 & 10 MICRON
           PP SPUN   2.5" DIA x 10", 20", 30" & 40"  0.1, 1, 5 & 10 MICRON
           PP PLEATED   2.5" DIA x 10", 20", 30" & 40"  0.1, 1, 5 & 10 MICRON


FILTER ELEMENTS                                                  SS316L FILTER HOUSING   Top


For a quote or more details: Click on Enquiry button on the left. Mention application, flow rate, pressure, micron rating, line size, and any other requirements.



Distributor Wanted

Distributors wanted throughout India, Middle East, Africa, Asia & South America. CLICK to apply   

Corporate Office:

B-101 Sanpada Station Complex, Sanpada

Navi Mumbai, 400 705, INDIA

Tel: 91-22-2775 2357 / 91-22-2775 5105


Manufacturing Facility:

12 Aditya Industrial Estate, Kumbhivali, Savroli Kharpada Road

Khalapur, Dist: Raigad. Maharashtra, 410 202, INDIA

Tel: 91-9930643977



Last modified: April 20, 2019