DELTA Strainers

   22 Years of Filtration Excellence

                        

   An ISO9001:2008 Certified Company

 

Home
Up
Natural Gas Filters
Compressed Air Filters
Fuel Water Separators
CNG / PNG Filters
Sintered Filters
Pharmaceutical
Filter Foam
Quality Control
Job Openings
Clientele
Testimonials
Enquiry
About Us
Contact Us


Strainers

  STRAINER FEATURES:

  • Line size from 1" nB through 40 " OD, Flange ratings : upto 1500 lb class
  • Tee Type, Y Type, Basket Type, Conical Strainers
  • Housing : Carbon Steel, SA 516 Gr. 70, SS304, 316, 316L
  • Basket:    SS304, 316, 316L, Monel 400
  • Fluids: Water, Sea Water, Chemicals, Lubricating Oil, LSHS, Natural Gas
  • Viscosity: 0.1 cp through 1000 cp
  • Operating Temperature: upto 200oC
  • Email: sales@deltafilters.com

A Strainer is a device through which either liquid or gas is passed for purification, filtering or separation from solid matter.It is used to prevent solid bodies from mixing in a liquid stream or flowline. Strainers come in several different styles based on the needs. A plate strainer is the simplest, in which water flows through a perforated plate. Often the plate is corrugated shape to increase surface area. A basket strainer is a design where the strainer is shaped like a basket and usually installed in a vertical system. The basket strainer is easier to clean, since debris is captured in the basket. It can also sometimes offer more straining surface area than a plate strainer, improving flow rates, or decreasing pressure loss through the strainer.

We manufacture a range of Tee Strainers, Y Strainers and Conical Strainers for Industrial and Commercial Use. Our strainers protect pipeline equipment from foreign matter. Delta strainers remove unwanted solid particles from liquids, steam, or gas. These are installed in pipelines to protect pumps, valves, meters, regulators and other costly equipment. Therefore it is critical to design & manufacture the strainer to meet process parameters.

Delta Strainers are designed, manufactured and supplied in various configurations:


Conical Strainers:

DELTA Conical strainer is a simple device for mechanical removal of contaminants and solids from pipelines. Construction consists of Wiremesh welded onto perforated plate in an conical shape. Conical Strainers are installed in between existing flanges in Pipelines to protect downstream equipment. Being of simple construction, these are effective for removal of foreign particles in a cost effective manner. DELTA Conical Strainers are constructed in SS304, SS316, SS316L etc

  • Line Size: 2 - 56
  • MOC: Stainless Steel 304/316/316L
  • Mesh Rating: 7 Mesh to 1250 Mesh

Conical Strainers

Download Catalog


Tee Type Strainer

DELTA Tee Strainer is a custom fabricated strainer. Tee Strainers are designed to remove foreign particles from pipelines. Tee Strainers provide excellent protection for downstream equipment like boilers, pumps, valves, and other related equipment. Typically DELTA Tee Strainer is constructed of carbon or stainless steel material. Optional materials, end connections and accessories are available.

  • Line Size: 2 - 48
  • End Connections: Flanged 150 LB through 600 LB or BUTT WELD
  • Body MOC: Carbon Steel (A234) , Stainless Steel 304/316/316L
  • Basket MOC: SS304/316/316L
  • Mesh Rating: 7 Mesh to 1250 Mesh

Tee Type Strainers Tee Type Strainers Tee Type Strainers


Y Type Strainer:

DELTA Y strainer is a low cost equipment for mechanical removal of contaminants and solids from liquid, gas or steam lines. This is carried out by means of a perforated plate or wire mesh straining element. Y Strainers are convenient to install in Pipelines to protect pumps, meters, control valves and other expensive equipment. Y Strainers are effective for removal of foreign particles in a cost effective manner. from pipelines. Y Strainers provide excellent protection for downstream equipment like boilers, pumps, valves, and other related equipment. Typically DELTA Y Strainer is constructed of carbon or stainless steel material. Optional materials, end connections and accessories are available.

  • Line Size: 2 - 18
  • End Connections: Flanged 150 LB through 600 LB
  • Body MOC: Carbon Steel (A106 Gr. B) , Stainless Steel 304/316/316L
  • Basket MOC: SS304/316/316L
  • Mesh Rating: 7 Mesh to 1250 Mesh

     Y Type Strainers

Download Catalog


 

Strainer Ratings are typically rated in U.S. Mesh instead of micron. Mesh ratings stands for the number of openings per linear inch using standard wire diameters. Wire mesh measures the number of wires (or threads) per linear inch, not the size of the holes between them. The micron rating goes down as the number of wires per inch goes up.

We have tabulated the rough relationship between between U.S. Mesh and microns. For accurate relationship the wire diametre should also be accounted for in the calculations.

U.S. Mesh Microns
10 2000
12 1680
14 1410
16 1190
18 1000
20 840
25 710
30 590
35 500
40 420
45 350
50 297
60 250
70 210
80 177
100 149
120 125
140 105
170 88
200 74
230 62
270 53
325 44
400 37
550 25
800 15
1250 10

For a quote : Click on Enquiry button on the left. Mention application, flow rate, pressure, mesh rating, line size, and any other requirements. 

Email: akini@deltafilters.com for more details


Distributor Wanted

Distributors wanted throughout India, Middle East, Africa, Asia & South America. CLICK to apply   

Corporate Office:

B-101 Sanpada Station Complex, Sanpada

Navi Mumbai, 400 705, INDIA

Tel: 91-22-2775 2357 / 91-22-2775 5105

Email: sales@deltafilters.com


Last modified: APRIL 24, 2016